Changes between Version 8 and Version 9 of EPO


Ignore:
Timestamp:
Mar 7, 2014, 11:10:06 AM (6 years ago)
Author:
Jayce Dowell
Comment:

Added information about how to the the Raspberry Pi LWATV GUI software outside of the SD image

Legend:

Unmodified
Added
Removed
Modified
  • EPO

    v8 v9  
    9999The Pi will be configured to automatically start the LWATV GUI software on boot and will update the cache of previous movies nightly.  The bandwidth usage for the software averages around 110MB per hour.
    100100
     101If you are interested in building your own disk image the Pi-optimized LWATV GUI software can be checked out via:
     102{{{
     103svn checkout https://fornax.phys.unm.edu/lwa/subversion/trunk/EPO/LWATV/RaspberryPi LWATV
     104}}}
     105
    101106===  Additional Configuration ===
    102107The software is setup for DHCP over a wired 10/100Mbit ethernet connection and VGA output.  If your setup is the same then no additional configuration is needed.  To change the video output resolution [http://elinux.org/RPiconfig see this page].  For help configuring a !WiFi connection [http://www.howtogeek.com/167425/how-to-setup-wi-fi-on-your-raspberry-pi-via-the-command-line/ see this page].