Changes between Version 18 and Version 19 of EPO


Ignore:
Timestamp:
Mar 26, 2014, 3:02:04 PM (6 years ago)
Author:
Jayce Dowell
Comment:

Added additional configuration information to the LWATV/Raspberry Pi section.

Legend:

Unmodified
Added
Removed
Modified
  • EPO

    v18 v19  
    9898
    9999===  Additional Configuration ===
    100 The software is setup for DHCP over a wired 10/100Mbit ethernet connection and VGA output.  If your setup is the same then no additional configuration is needed.  To change the video output resolution [http://elinux.org/RPiconfig see this page].  For help configuring a !WiFi connection [http://www.howtogeek.com/167425/how-to-setup-wi-fi-on-your-raspberry-pi-via-the-command-line/ see this page].
     100The software is setup for DHCP over a wired 10/100Mbit ethernet connection and VGA output.  If your setup is the same then no additional configuration is needed.  However, it is a good idea to update both the software and the movies before use.  This can be done by logging
     101into the Pi and running the following from a terminal:
     102
     103{{{
     104cd ~/LWATV/
     105svn update
     106./updateMovies.py -v
     107sudo rpi-update
     108}}}
     109
     110After running these commands you should reboot the Pi.
     111
     112To change the video output resolution [http://elinux.org/RPiconfig see this page].  If you are using a Adafruit HDMI/VGA adapter you may also need to set "hdmi_drive=2" to get the display working.  For help configuring a !WiFi connection [http://www.howtogeek.com/167425/how-to-setup-wi-fi-on-your-raspberry-pi-via-the-command-line/ see this page].
    101113
    102114[[BR]]